Toshiba TEC B-411 SERIES - Manual (Page 6)

EMI-33017
1. SPECIFICATIONS
1.1 PRINTER
— — M o d e l
Item ^
B-411
Power Requirement Ni-Cd battery (DC 13.2V)
Capacity: 19.7mm (500") or 1.4AH
Charging time: 7—8AH (Rechargeable a minimum of 300 times)
Temperature Limits 5*0 to 4&C (41*F to 104-F)
Relative Humidity 25% to 85% RH (no condensation)
Print Head Thermal Print Head (6 dots/mm)
Printing Method Thermal Direct
Print Speed 25.4mm (1”)/sec.
Available Printing Width 46,8mm (1.84"), 72.2mm (2.84"), 97.6mm (3.84")
Bar Code Format Codabar, ITF, CODE39 Parallel only
(Barcode height is less than 139 dots)
Type Fonts Standard 1 (8 x 18) dots
Standard 2 (16X24) dots
Bold 1 (8X18) dots
Bold 2 16x24) dots
3/4" character (38 x 75) dots
Graphic Font (8X12) dots
Interface / Serial Interface (RS-232C)
1.2 PAPERS
—-^^Paper Type
Item
Thermal Paper (Label)
Width
Length (Pitch)
Thickness
Roll Diameter
53.8mm (2.12"), 79.2mm (3.12"), 104.6mm (4.12”)
Max. 998mm (Max. 39.3")
0.14mm-'0.15mm (0.0055"-0.0059")
52mm (2.04") max.
1.3 INTERFACE
■■ —------------ Interface
Item —
Electronics specification
RS-232C
Baud rate 9600bps or 19200bps
Protocol XON/XOFF, 8 bit Data, Non Parity, Stop bit = 2 bit
Signal TXD, RXD, RTS, CTS