3 operation panel, 1 how to installing and adjust the shoulder strap, Operation panel – Toshiba TEC B-411 SERIES User Manual
Page 9: How to installing and adjust the shoulder strap, Installing the printer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.3 OPERATION PANEL
EMI-33017
ERROR O
BATTERY O
PRINT □
FEED
o
ON POWER OFF
<3
ERROR Indicator (Green)
Lights when the printer does not operate correctly.
BATTERY Indicator (Orange)
Lights when the battery voltage drops. (Replace
the battery)
PRINT Indicator (Green)
Lights for one second when the power ts turned
ON.
Lights while printing or issuing labels.
FEED Button
This button is used to feed the labels.
POWER Slide switch
Power supply switch for the printer.
3.
INSTALLING THE PRINTER
3.1 HOW TO INSTALLING AND ADJUST THE SHOULDER STRAP
Pass the end of the Shoulder Strap through the tab of the printer from the inside, then pass it through
parts A, B and C as shown in the figure. After adjusting the length of the strap, insert the loose end
of the strap into the shoulder pad.