Toshiba SD-V290-S-TU - Manual (Page 31)

Operation with DVD and Video CD (Continued)
DVD I I VCD2.0 I I VCD1.1
.... 1
Repeat |
DVD Video Discs - Repeat Chapter/Title/Off
1 To repeat the currently playing chapter, press
REPEAT.
The Repeat Chapter icon appears on the TV screen.
2 To repeat the title currently playing, press REPEAT a
second time.
The Repeat Title icon appears on the TV screen.
3 To exit Repeat mode, press REPEAT a third time.
The Repeat Off icon appears on the TV screen.
Video CDs - Repeat Track/AII/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat Track icon appears on the TV screen.
2 To repeat the disc currently playing, press REPEAT
two times.
The Repeat All Icon appears on the TV screen.
3 To cancel Repeat mode, press REPEAT repeatedly until
the Repeat Off icon appears on the TV screen.
9
Note
• On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the Repeat function.
See page 20.
• If you press SKIP ) twice or SKIP (NM) during
Repeat Chapter/Track playback, the repeat playback
cancels.
Repeat A-B DVD I VCD2.0 I VCD1.1
To repeat a sequence in a title:
1 Press A'B at your chosen starting point.
A- appears briefly on the TV screen.
2 Press A-B again at your chosen end point.
A-B appears briefly on the TV screen, and the repeat
sequence begins
3 To cancel the sequence, press A-B.
Zoom
DVD I VCD2.0 I VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to acti­
vate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to six steps.
2 Use •^/►/A/T buttons to move through the zoomed
picture.
3 Press CLEAR to resume normal playback or return to
the paused image.
SNote
• The zoom function may not work for some DVDs.
• The zoom function may not work on multi-angle
scenes.
Marker Searchl
g
OC
UJ
Q.
o
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when playback
reaches the spot that you want to memorize.
The Marker icon wiil appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, press to select a Marker
number that you want to recall.
3 Press ENTER.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
To clear a Marked Scene
1 During disc playback, press SEARCH.
The Marker Search menu will appear on the screen.
2 Within 10 seconds, press to select a Marker
number that you want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
1-33