Troubleshooting (continued) – Toshiba SD-V290-S-TU User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting (Continued)
Symptom
Cause
Correction
Some channels are
skipped over when
using CH/TRK (+/-)
• Those channels were deleted with the
CH. ADD/DEL option.
• Use CH. ADD/DEL. to restore channels.
See “Channel Selection” on page 16.
Picture and sound of
broadcasting channel
are weak or missing.
• Antenna or cables are loose.
• Tighten connections or replace cable.
• Wrong TUNING BAND option is being
used.
• Try all TUNING BAND options. See
"Channel Selection” on page 16 for
details.
Camcorder image is not
shown.
• Camcorder is off.
• Turn camcorder on and operate
properly.
Camcorder image via
A/V input to DVD+VCR
is not shown on TV
scroon.
• DVD+VCR SOURCE SELECT is not set
to LINE1 or LINE2.
. Press INPUT SELECT to select LINE
input channel (LINEI or LINE2).
Timer recording is not
possible.
• Clock in DVD+VCR is not set to correct
time.
• Set clock to correct time. See “Setting
the Clock” on page 17.
• Timer has been programmed
incorrectly.
• Reprogram Timer. See “Timer
Recording” on page 24.
• TIMER indicator does not appear after
programming timer.
• Reprogram Timer
TIMER indicator
appears after DVD+VCR
is turned off.
• DVD+VCR is in Timer Recording mode.
• This is the normal indication that the
DVD+VCR is in TIMER mode.
Stereo Audio Record
and/or Playback is not
present.
• TV is not Stereo-compatible.
• No action is possible.
• Broadcast program is not in stereo for
mat.
• No action is possible.
• DVD+VCR A/V Out jacks are not con
nected to TV A/V In jacks.
• Make A/V connections. Stereo is
available only via A/V output from
DVD+VCR.
• DVD+VCR Audio/Video Out is not
seiected for viewing at the TV.
• Select AUX or A/V source as TV input.
• DVD+VCR BROADCAST TYPE mode is
set to SAP or MONO.
• Set BROADCAST TYPE mode to
STEREO. See “Setting the VCR Setup
Menu” on page 16.
g
oc
ILI
Q.
o
Moisture Condensation
Moisture condensation can occur;
In locations where moisture condensation may occur;
• When the DVD+VCR is moved from a cold place to a
warm place.
• Under extremely humid conditions.
• Keep the DVD+VCR plugged into an AC power outlet
with POWER On. This will help prevent condensation.
• When condensation has occurred, wait a few hours
for the DVD+VCR to dry before using it.
1-43