Connecting the speakers (sp-fsx1/sp-fsx3), H caution – JVC FS-X 3 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Connecting the Speakers (SP-FSX1/SP-FSX3)
These speakers are exclusively for this system. Using with other devices will damage the speakers.
Connect the speaker cords between the speaker terminals of the Unit and those of the Speakers.
• When inserting the speaker wire lead, open the speaker terminal.
• Connect the black cord to the (-) terminal and the cord without a black line to the (+) terminal.
Right side (rear view)
Left side (rear view)
Notes
•
Since both speakers are the same, you can put either one to the right or left side.
• Do not connect other speakers to the Unit The difference of the bad impedance causes failures.
• Do not use the supplied speakers in paraliel with other speakers.
H CAUTION:
• A TV may display irregular colors if iocated near the speakers, if this happens, set the speak
ers away from the TV.