Using the panic alarm, Programming additional transmitters, Transmitter battery service – Chrysler 2008 300 User Manual

Page 25

Advertising
background image

Using The Panic Alarm:

To turn the panic alarm feature ON or OFF, press and
hold the PANIC button on the transmitter for at least one
second and release. When the panic alarm is on, the
headlights and park lights will flash, the horn will pulse
on and off, and the interior lights will turn on.

The panic alarm will stay on for 3 minutes unless you
turn it off by either pressing the PANIC button a second
time or drive the vehicle at a speed of 15 mph (24 km/h)
or greater.

NOTE:

• The interior lights will turn off if you turn the ignition

switch to the ACC or ON position while the panic
alarm is activated. However, the exterior lights and
horn will remain on.

• You may need to be less than 35 feet (11 meters) from

the vehicle when using the transmitter to turn off the
panic alarm due to the radio frequency noises emitted
by the system.

Programming Additional Transmitters

Refer to SENTRY KEY “Customer Key (Fob) Program-
ming.”

(See page 17 for more information.)

If you do not have a programmed transmitter, contact
your dealer for details.

Transmitter Battery Service

The recommended replacement battery is one CR2032
battery.

NOTE:

• Perchlorate Material — special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

25

2

Advertising
This manual is related to the following products: