Tail/stop, tail, turn signal light, and backup, Light — 300c models – Chrysler 2008 300 User Manual
Page 468
Advertising
Tail/Stop, Tail, Turn Signal Light, and Backup
Light — 300C Models
1. Open the Trunk.
2. Remove two fasteners from the back of the tail light
assembly.
3. Pull back the trunk liner.
4. Remove the remaining fastener from the back of the
tail light assembly.
5. Push the electrical connector locking tab to the side.
6. Disconnect the electrical connector.
468
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: