Chrysler 2010 Country - Owner Manual - Manual (Page 418)

1. Loosen (but do not remove) the wheel lug nuts by
turning them to the left one turn while the wheel is still
on the ground.
2. To remove the compact spare tire/cover assembly,
assemble the winch handle extensions to form a “T” and
fit the winch “T” handle over the drive nut, refer to “2”
configuration in tool graphics. Rotate the nut to the left
until the winch mechanism stops turning freely. This will
allow enough slack in the cable to allow you to pull the
spare tire out from under the vehicle.
Jack Warning Label
Tools
1A – Spare Tire Hook (Piece 1) 2A – Winch “T” Handle (Piece
1)
1B – Spare Tire Hook (Piece 2) 2B – Winch “T” Handle (Piece
2)
1C – Spare Tire Hook (Piece 3) 2C – Winch “T” Handle (Piece
3)
6
WHAT TO DO IN EMERGENCIES 417