Chrysler 2010 Country - Owner Manual User Manual
Page 484
Advertising
2. Remove the tail lamp assembly by removing the two
screws from the inboard side. Use a fiber stick or similar
tool to gently pry the light on the outboard side to
disengage the two ball studs.
NOTE:
• If a screwdriver is used, make sure a soft material is
placed between the vehicle body and tool so not to
scratch the paint.
• The PRY location is best closest to the studs while
dislodging them separately.
Tail Lamp Housing Fastener Removal
7
MAINTAINING YOUR VEHICLE
483
Advertising
This manual is related to the following products: