Clear, Onnection, Anager – CLEAR 4G Mobile USB Users Guide User Manual
Page 10: Ettings, Manage your mobile usb (continued)
9
Manage Your Mobile USB (continued)
CLEAR Connection Manager – Settings
On the Settings Tab, you can:
Set your CLEAR Connection Manager Preferences.
Check for software updates.
Select “Preferences” to perform the following functions:
Run App on PC Startup: Opens the CLEAR Connection Manager every time you turn on your
computer.
Always on Top: The CLEAR Connection Manager always appears on top of other windows.
Dock to System Tray: Use if you want the CLEAR Connection Manager to remain attached to
the System Tray.
Display Connection Timer: Shows the length of time for each connection on the CLEAR
Connection Manager.
Connect Automatically: The factory default setting in “ON.” Keep this setting “ON” if you want
your Mobile USB to connect automatically whenever there is a signal. “Connect Automatically”
occurs only if the computer is not connected to wi-fi.
Manage Wi-Fi Connections: Manage your wi-fi access through your CLEAR Connection
Manager.
Allow Simultaneous Connections: The factory default setting is “ON.” Keep the setting “ON” if
you want your computer to be allowed to connect to both 4G and wi-fi at the same time.
Profiles: Use if you want to change your network profile. This is rarely used, except for
administrative purposes.