CLEAR Hub Express Users Guide - Manual (Page 18)

17
x DTIM Interval: Set the number of AP Beacons between each DTIM (Delivery Traffic Indication
Message).
x CTS Protect Mode: This protects transmission from interference. This is preset to Auto Mode.
x Preamble Length: Set the Preamble Length, if any.
x Transmission Power: Change the transmission power, if any.
x Access Control List Settings: Allows you to change what type of System Default, if any.
Click “APPLY” when you’re ready to change the advanced Wi-Fi settings.
If you don’t want to make any changes, click “CANCEL”.
Manage your CLEAR Hub Express (continued)
CLEAR Hub Express Home Page / Wi-Fi Settings / WPS
Warning: This tab includes settings that could negatively impact the performance of the CLEAR Hub Express, if set
incorrectly. These settings should be modified only by advanced users or if directed by CLEAR Customer Care.
The Wi-Fi Settings / WPS Tab allow you to configure your devices that support Wi-Fi Protected
Setup.
Wi-Fi Protected Setup:
x Enable WPS: Wi-Fi Protected Setup (WPS) could allow users to fetch an AP wireless
configuration, which includes SSID, Security Method and Key).
x PBC Mode: Process WPS by Pushing Button method.
x PIN Mode: Process WPS by PIN code method (AP and station share the PIN code).
x PIN Code: Input PIN is generated from the station if PIN Mode is selected.
Click the checkout next to
“Enable WPS” to enable and apply this feature. Uncheck the box if you
want to disable the feature.
If you’re using your CLEAR Hub Express
click
here to open the CLEAR Hub Home
Page.