CLEAR Modem M Series User Guide - Manual (Page 18)

17
Manage Your Modem (continued)
CLEAR Modem Home Page / Internet / WiMAX Security
Warning: This screen includes settings that could negatively impact the performance of the Modem,
if set incorrectly. These settings should be modified only by advanced users or if directed by CLEAR
Customer Care.
This screen contains your authentication method.
Authentication is only required if you want to change the Modem from connecting to our production
network to a test network. It is not required by CLEAR.
 Authentication Method: Use the drop-down box to select EAP-TLS (the default setting) or EAP-
TTLS/MS- CHAPv2.
 User Name: Enter the User Name you want to use.
 Password: Enter the Password you want to use.
 Password Confirmation: Reenter the Password you selected.
 Realm: Enter the Realm you want to use.
Click “Apply” when you’re ready to change the WiMAX Security settings.
If you don’t want to make any changes to the authentication or other security settings, click “Undo”.
The other links (Personalize, Status, Telephony, Port Forwarding, Local Address, and Control Panel)
appear on the top of all screens of the Modem Home Page.
The Wizard button starts the set-up wizard over again. The Wizard button is available on every
screen of the Modem Home Page.
The Restart button is used to restart the Modem. The restart button is available on every screen of
the Modem Home Page.
If you’re using your Modem
and are connected to the
internet, click here to open
the Modem Home Page.