CLEAR Modem M Series User Guide - Manual (Page 29)

28
Manage Your Modem (continued)
CLEAR Modem Home Page / Control Panel / System
This screen allows you to manage additional features on your Modem.
 Language Used in User Interface: Select the language for the User Interface (CLEAR Modem
Home Page) – the default language is English.
 Enable WiMAX Radio Interface: Check the box to enable the WiMAX Radio Interface.
 Enable LED: Check the box to enable the LEDs on the front of the Modem.
 Auto Refresh Interval: Enter, in seconds, the interval for Status Auto Refresh. The valid range
is 2 seconds – 9999 seconds.
 Rebootstrap EMS: Check this box to reconnect the Modem with the EMS. Only perform this
function when advised by and under the supervision of CLEAR Customer Care.
Click “Apply” when you’re ready to change the system settings.
If you don’t want to make any changes to the system settings, click “Undo”.
The other links (Personalize, Internet, Status, Telephony, Port Forwarding, and Local Address)
appear on the top of all screens of the Modem Home Page.
The Wizard button starts the set-up wizard over again. The Wizard button is available on every
screen of the Modem Home Page.
The Restart button is used to restart the Modem. The restart button is available on every screen of
the Modem Home Page.
If you’re using your Modem
and are connected to the
internet, click here to open
the Modem Home Page.