CLEAR Modem G Series User Guide - Manual (Page 15)

14
Manage Your Modem (continued)
CLEAR Modem Home Page / Basic / Reset Factory Settings Tab
Use this tab to reset the Modem to the factory default settings.
Note: It is important to note that many device settings will be reset to the factory default settings. For
example, the password required to log in and manage your Modem will be reset to “CLEAR123”, the
factory default setting.
 Restore Factory Settings: Check the box to restore the Modem to the factory settings.
 Check for Updates Now: Check to see if updates are available for the Modem.
Click “APPLY” when you’re ready to restore the Modem to the factory settings and / or check for
updates.
If you don’t want to restore the factory default settings or check for updates, click “CANCEL”.
The other tabs (Home, Device Status, and Advanced) appear on all screens of the CLEAR Modem
Home Page.
At the bottom of every tab of the Modem Home Page, you can click:
 Logout: To log out of the Modem.
 Reboot: To turn the Modem off and turn it back on.
 Reconnect: To reconnect to the Modem, if you’ve lost your connection.
You also can press the Reset button, on the side of the Modem, to reset the Modem to the factory
settings. Please refer to the Quick Tips / Reset the Modem to the Factory Settings section or click
here for more information.
If you’re using your Modem
and are connected to the
internet, click here to open
the Modem Home Page.