Comtrol WCom2 - Manual (Page 19)

Port Monitor and Test Terminal User Guide: 2000485 Rev. B Using Port Monitor (PMon2) - 19
Using Port Monitor (PMon2)
You can use this subsection to test the RocketPort, RocketModem IV, or
DeviceMaster driver installation. If you need to install the device driver, go to
ftp://ftp.comtrol.com/html/default.htm to locate the latest driver and driver
installation documentation.
Overview
This procedure will check whether the RocketPort, RocketModem IV, or
DeviceMaster can:
• Communicate through the Comtrol device driver
• Determine if a port is open with an application
Testing Comtrol COM Ports
If necessary, use Comtrol Utility on Page 9 or PortVision DX on Page 13 to install
Port Monitor.
1. Start Port Monitor.
• DeviceMaster:
- If necessary, start PortVision DX. From the Start menu, select Programs
> Comtrol > PortVision DX > PortVision DX or click the desktop shortcut.
- Select Tools > Applications > Port Monitor (PMon2).
• RocketPort or RocketModem IV: From the Start menu, select Programs >
Comtrol > Utilities > Port Monitor (PMon2).
2. Click Add Ports using the icon or Tools > Add Ports,