Comtrol RocketPort 550 uPCI Windows 98 - Manual (Page 12)

12
Rocket Port Interface Box DB25 Signals
DB25 Pin RS232 Signal RS422 Signal
(RocketPort
RS232/422
version only)
Universal Interface
2 TxD *See note See UI manual
3 RxD *See note See UI manual
4 RTS *See note See UI manual
5 CTS *See note See UI manual
6 DSR *See note See UI manual
7 Signal Gnd *See note See UI manual
8 DCD *See note See UI manual
20 DTR *See note See UI manual
15 Not used RxD+ RxD(B) See UI manual
17 Not used RxD - RxD(A) See UI manual
19 Not used TxD+ TxD(B) See UI manual
25 Not used TxD - TxD(A) See UI manual
*Note : All RS232 signals are present in RS422 mode.
The RocketPort interface box can only be used with the RocketPort 550-8 and
RocketPort 550-16. These controllers have a single DB25F mounted on the backplate
which connects via the RocketPort cable to the interface box. Alternatively the
RocketPort 550-8 and 550-16 controllers may connect to the Comtrol Universal
Interface (UI). Refer to the UI manual for connector pin-outs.
The Quad, Octa, RJ11 and RJ45 RocketPort versions do not support RS422 mode.
Pins 1, 9, 10, 11, 12, 13, 14, 21, 22, 23 and 24 of each 25 way connector are not used.