Comtrol RocketPort 550 uPCI Windows 98 User Manual
Page 5
5
4. Installing the RocketPort 550/RocketPort 550 Universal
Windows 98 Device Driver
1.
In the previous section you installed the RocketPort 550 and powered up the PC
2.
Windows will detect the new hardware at power up and display the:
"Add New Hardware Wizard" dialog Window
3.
Click Next
4.
The next dialog window asks :
Search for the best driver for your device. (Windows Default)
or
Display a list of all the drivers in a specific location, so you can select the driver
you want.
ENSURE THAT SEARCH IS SELECTED
Click Next
5.
The next dialog window asks where to search for the Driver.
Select Specify a location
Enter c:\Comtrol\Installations \RP550W98 into the dialog Window
If you extracted the driver files to an alternative folder then replace the above path with the
alternative path for the driver files.
6.
Widows will search the folder for the Driver
When found, the dialog displays the path to the file RCKT550.INF
Click Next to start the installation
7
Windows will briefly display the progress of the Driver installation.
Windows will display the Finished Installing dialog window
Click Finish.
Windows will now locate and install the individual ports. The time taken to
complete this depends on the number of boards and ports to be located.
Your RocketPort 550 Windows 98 Driver is now installed