Crane Song AVOCET II - Manual (Page 8)

Input selection
The DAW input will be S/PDIF,
AES or Optical selected in
Shift mode. Digi- 1, 2 are AES,
the analog inputs are Bal-
anced
Talk back button sends the
talk mic into the head-
phone output. It is push-on
push-off, however holding
it for 2 seconds allows
quick release - non latching
Truncates the digital input to 16 bits. For
checking what 16 bits sounds like
Input level when
Phones or Dim modes are
not selected
1 DB steps through most of
the range
Mute kills the main output.
On power up Avocet is
muted
Monos the
stereo source
Dims the main audio path. The dim level
is set by turning the level while dim mode
is active.
Selection of phones is over ridden by
selecting dim.
Changes the
phase of one
channel, disabled
in surround mode
SHIFT MODE
to reach the setup
functions (they have the
smaller text on the panel)
Selects which
speaker output
1 of 3
Channel Selection
to 7.1 surround
8
MAIN FUNCTIONS