Cisco WEC600N - Manual (Page 22)

Chapter 3
Configuration
21 Dual-Band Wireless-N ExpressCard
WPA Personal
WPA Personal offers two encryption methods, TKIP and
AES, with dynamic encryption keys.
WPA Personal
Encryption Select TKIP or AES.
Passphrase Enter the network’s Passphrase (also called a
pre-shared key) of 8-63 characters.
Click Next to continue, or click Back to return to the
previous screen.
WPA2 Personal
WPA2 Personal uses the encryption method, AES, with
dynamic encryption keys.
WPA2 Personal
Passphrase Enter the network’s Passphrase (also called a
pre-shared key) of 8-63 characters.
Click Next to continue, or click Back to return to the
previous screen.
WPA Enterprise
WPA Enterprise features WPA security used in coordination
with a RADIUS server. (This should only be used when a
RADIUS server is connected to the router.) WPA Enterprise
offers two authentication methods, EAP-TLS and PEAP,
as well as two encryption methods, TKIP and AES, with
dynamic encryption keys.
Authentication Select the authentication method your
network is using, EAP-TLS or PEAP.
EAP-TLS
WPA Enterprise - EAP-TLS
If you selected EAP-TLS, configure the following:
Login Name Enter the login name of your wireless
network.
Server Name Enter the name of the authentication server
(this is optional).
Certificate Select the certificate you installed to
authenticate you on your wireless network.
Encryption Select the type of encryption, TKIP or AES.
Click Next to continue, or click Back to return to the
previous screen.