Connections, Connecting headphones, Connecting power – COBY MP-C353 User Manual
Page 13: Ac adapter, Usb charge, Getting started
Page 1
Coby Electronics Corporation
www.cobyusa.com
Page 1
Connections
Connecting Headphones
Connect headphones/earphones
to the Headphone Out jack for pri-
v a t e
listening.
Lower the volume level before connecting
headphones, then gradually increase the vol-
u m e
for comfortable listening.
Hearing experts advise against the constant use of personal stereos played
at high volume.
Constant high-volume use can lead to hearing loss. If you experience
ringing in your ears or hearing loss, discontinue use immediately and
seek medical advice.
Connecting Power
The MP-C353 operates on an integrated rechargeable lithium-ion battery.
The battery should be charged fully before using your player for the
first time. There are two ways to charge your player:
AC Adapter
This AC adapter should be used with 100-240V 50/60Hz AC wall outlets.
Plug the supplied AC adapter into an AC 100-240V electrical wall outlet.
The red charge lamp will light to indicate that power has been connected.
Connect the other end of the adapter to your player’s USB port. The
green charge lamp will light to indicate that charging is underway.
When charging has
been completed,
the green charge
lamp will dim or
turn off.
USB Charge
Use the supplied USB
cable to connect your player to a computer. Your player will be charged while
it is connected to a powered-on computer. USB- charging will take more time
than charging with the AC adapter.
GETTING STARTED
To USB Port
To AC Wall Outlet:
AC 100-240V