Introduction, Installation, Power connection – Drawmer Six-Pack Multi-Ch. Dynamics User Manual

Page 4

Advertising
background image

“SIX-PACK” OPERATORS’ MANUAL

2

INTRODUCTION

The Drawmer SixPack is a six channel Expander/Compressor/Limiter with extensive

linking facilities which allow for the various configurations commonly used in

multi-channel surround processing as well as the more conventional stereo and

single channel operation.

Each channel has a program adaptive expander, with variable threshold and

release times, followed by a soft knee compressor with optional auto attack

and release as well as the normal manual controls. A variable threshold,

zero-overshoot limiter provides total protection against even the fastest

transients and is particularly valuable in live sound applications for driver

protection.

An optional 125Hz filter on channel 6 may be used to create the LFE channel

from a 5-1 mono mix.

Each channel of the SixPack has balanced XLR inputs and outputs, with relay

hard wire bypass, so signals still pass through the unit when the power is off.

Powered by a universal switch mode power supply, the SixPack operates from

mains voltages between 85 - 250v, eliminating the need to make any changes

when touring and allowing the unit to remain fully operational during large

fluctuations in the mains power supply.

INSTALLATION

The “Six-Pack” is designed for standard 19" rack mounting and occupies 3U of rack

space. Avoid mounting the unit directly above power amplifiers or power supplies

that radiate significant amounts of heat. Fibre or plastic washers may be used to

prevent the front panel becoming marked by the mounting bolts.

POWER CONNECTION

The unit will be supplied with a power cable suitable for domestic power outlets in

your country. For your own safety it is important that you use this cable. The unit

should always be connected to the mains supply earth using this cable

Powered by a universal switch mode power supply, the SixPack operates from

mains voltages between 85 - 250v, eliminating the need to make any changes

when touring and allowing the unit to remain fully operational during large

fluctuations in the mains power supply.

Advertising