Linking – Drawmer Six-Pack Multi-Ch. Dynamics User Manual
Page 9
Advertising
SIX-PACK” OPERATORS’ MANUAL
7
LINKING
Link:
Pressing the link switch on any channel causes it to
be linked to and completely controlled from, the
previous channel (to the left). Therefore, pressing
link on channel 2, will link channels 1 and 2, with
channel 1 being the master channel. In addition,
pressing link on channels 2 and 3 will link channels
1,2 and 3 with channel 1 being the master.
All channels show Master or Linked status.
Channel 1 is always a master channel.
The following diagram shows the more commonly used linking configurations:
Advertising