Drawmer M500 Dynamics Processor - Manual (Page 20)

M500 OPERATORS MANUAL Ch 3 - 14
THE PATCH DISPLAY FOR SAVE
SAVE PATCH(es) YES will save the current patch from the current channel. The
SAVE Patch option will automatically detect which LINK mode (eg.
Stereo) is in operation and will offer various suitable save
methods. If dissimilar stereo patches are being saved, the
following display will be seen.
SECONDARY PATCH
DISPLAY FOR A
STEREO SAVE
DOWN The last (bottom) screen encompasses MIDI CHANGES and
MEMORY PROTECTION.
When set to YES YES, enables the M500 to utilise MIDI patch changes
MIDI CHANGES
and also to transmit them. These MIDI commands will be on the
corresponding MIDI channel set on the MIDI screen). This
parameter adjustment is replicated on the MIDI pages.
LAST PATCH DISPLAY
This will prevent the user patches from being overwritten and
MEMORY PROTECTION
should be disabled if you wish to store a patch you have edited.
Attempting to store a patch with the protection turned on will
cause an immediate jump to this parameter to warn you that the
protection mode is set.
If PATCH CHANGES is set to YES YES on this screen or the MIDI page,
then a MIDI patch change command will be output whenever a
patch is down-loaded from the front panel.
RECORD
Primary function: Generate User Envelopes for the GATE Effect. This page is used exclusively with
the GATE Effect when it is required to make use of the GATE's ability to super-impose recorded
sound envelopes. This offers far more complexity than the standard 'Peak-Attack-Hold-Release'
envelope characteristics.
For trouble free use, the following points must be considered:
• GATE will need to be set to RECORDED RECORDED.
TYPE
• Only audio envelopes present on channel one will be accepted.