Drawmer Advanced Dynamics for Mackie D8B User Manual

Page 3

Advertising
background image

3

User’s Guide

Note:

Any future revisions of this guide will be available for

viewing and downloading from our website: www.mackie.com.

Contents

Iconography ----------------------------------------------------------------- 2

Introduction ---------------------------------------------------------4

About Drawmer Advanced Dynamics ---------------------------------- 4
About the D8B UFX Card ------------------------------------------------- 4
About the Drawmer ADX-100 Plug-in -----------------------------------5

Let’s Get Started ---------------------------------------------------6

Requirements --------------------------------------------------------------- 6
Authorizing the Plug-in --------------------------------------------------- 6
Unlock Procedure ---------------------------------------------------------- 7
Configuring the Plug-in --------------------------------------------------- 8

Using the ADX-100 plug-in-------------------------------------- 10

Front Panel Overview ---------------------------------------------------- 10
Global Controls ------------------------------------------------------------ 11
Noise Gate -------------------------------------------------------------------13
Expander -------------------------------------------------------------------- 17
Compressor/Limiter ----------------------------------------------------- 19
Saving, Loading and Resetting a Preset ------------------------------ 22

Automation and Snapshot Control --------------------------- 25

Dynamic Real Time ------------------------------------------------------- 25
Dynamic Off-line --------------------------------------------------------- 25

FX Routing --------------------------------------------------------- 26

The Plug-in Configuration Window ----------------------------------- 26
Stereo Plug-in Routing --------------------------------------------------- 27
Inserting a Plug-in into a Channel ------------------------------------- 28
Using an Aux Send with a Plug-in -------------------------------------- 29
Send the Input Signal to the Aux Bus --------------------------------- 29
Pre-Fader and Post-Fader Auxiliary Sends --------------------------- 30
The FX Return Channel --------------------------------------------------- 31

Advertising