DVIGear DVI-7312 - Manual

DVI-7312
Single-Link DVI
Fiber Optic Extender, 2x LC Quick Start Guide
Introduction
DVI-7312 is a Fiber Optic Extender designed to transmit single-link DVI signals over fiber optic cables at
distances up to 2000 meters (~1.2 miles). This extender provides exceptional signal fidelity and supports
a wide range of input resolutions. The unit consists of an optical transmitter module that converts the DVI
input signal into high-speed light pulses for transmission over two (2) detachable multi-mode or single-
mode glass fibers and an optical receiver module that converts the light pulses back to a DVI signal for
display on a monitor or projector. A programmable memory chip in the transmitter unit captures and
stores the EDID from the connected display, thereby eliminating the need for copper cables. These
features make the DVI-7312 the ideal solution for any application that demands flawless image quality
from DVI signals that must be extended over very long cable distances.
Typical Application
DVI-7312 Single-Link DVI Fiber Optic Extender, 2x LC
1
DVI-7312-RX
Receiver
DVI Port
DVI-7312-TX
Transmitter
DVI Port
AC Power
Adapter
Two Multi-Mode or Single-Mode LC Optical Cables
1
2
Optional
AC Power
Adapter
1 2 1 2