DVIGear DVI-7312 User Manual
Page 4
DVIGear
1059 Triad Court, Suite 8,
Marietta, GA 30062
Toll Free: 888.463.9927
Tel: 770.421.6699
Fax: 770.234.4207
[email protected]
www.dvigear.com
4
Instructions for Learning the EDID from a Display
1.)
Apply power to the display.
2.)
Connect the DVI-7312 Transmitter unit to the display’s DVI input port.
3.)
Connect the External AC Power Adapter to the Transmitter unit.
4.)
Press the Learn EDID button (page 2 - #5) by manually inserting a stylus into the side of the
Transmitter unit. If the EDID is properly read, the BLUE Indicator LED (page 2 - #2a) should
illuminate once.
5.)
Remove the External AC Power Adapter from the Transmitter unit.
6.)
Disconnect the Transmitter unit from the display and connect it to the DVI signal source.
7.)
Follow the Installation Instructions (3-6) listed on page 3.
Insert a stylus to press the Learn EDID Button
Learn EDID Button
DVI-7312-QSG-01 / August.2013