DVIGear DVI-3120a - Manual (Page 7)

-5-
4.3 Connecting Power to the Unit
This unit is shipped with an Plug-In Power Adapter that converts 100~240VAC@
50-60Hz to 5VDC. Connect the DC Output Cord from the Power Adapter to the
back of the unit and then plug the Power Adapter into an AC power receptacle.
When AC power is applied in this fashion, the Power LED indicator will illuminate.
5.0 OPERATING THE UNIT
The Scaler is controlled via three buttons with status indicated by an On Screen
Display.
PC/HD OUTPUT
MENU
480p XGA
+
• Menu Button: This Button displays the Menu Options via the On Screen
Display on the display device connected to the output.
• + and – Buttons: These Buttons allow navigation within the Menu and
adjustments of the parameters available.
• XGA Reset: Simultaneously depressing the – and + buttons returns
settings to factory defaults and sets the output to XGA@60 Hz.
Pressing the Menu Button results brings up the Initial or Main Menu. Move the
cursor to the desired setup option by using the + and – buttons. Press the Menu
Button again to call up that option.
Input Set up
Output Set up
Picture Adjust
HV Adjust
OSD Adjust
System Information
Auto Adjust
Exit
Once the desired option is reached and selected, a new Menu will appear and
you once again use the + & – Keys to select the parameter you wish to change
or adjust.