Operating your telephone – Clarity C2210 User Manual

Page 17

Advertising
background image

Visual Ringer
With the DC power source attached,

the backlit keypad will flash to alert of

an incoming call.This feature can be

enabled/disabled in the Setup Menu (see

page 12).

Large Multi Function LCD
An adjustable LCD shows the number

you are dialing, displays numbers stored

into the PhoneBook and, with Caller ID

service displays information about the

caller before you answer.

Backlit Keypad
The keypad is backlit.The keypad’s back-

light will be ON when the handset is

lifted from the cradle, to make dialing

easier in low light conditions, and to

make the phone visible when answering

a call. If the Visual Ringer is set to ON

(in Setup Menu), the keypad will flash

when the phone rings (see page 12).

Nitelite
The Nitelite softly illuminates the key-

pad when the phone is in stand by

mode (not in use), so that the user can

easily find the telephone in the dark.

The Nitelite can be turned off with a

switch on the right side of the telphone

that provides OFF/ LO/ HI operation.

All the backlight keypad functions are

valid in either position of the nitelite

switch.

Alarm ON/OFF
Press and hold the Alarm ON/OFF but-

ton to enter the “Set Alarm Clock

ON/OFF” option in the setup menu.

Press the Alarm ON/OFF button or lift

the handset to turn the alarm off while

it is sounding. Pressing any other button

will snooze the alarm for 9 minutes.

Flash
Flash is a feature that enables you to

answer a call if you have call waiting.

Please contact your local telephone

company for information on subscribing

to this feature. Pressing the FLASH but-

ton while you are having a phone con-

versation will pick up the second con-

versation and place the first call on hold.

Press the FLASH button again to contin-

ue your conversation with the first

caller.

Last Number Redial
Redial allows you to automatically redial

the last telephone number you called

(up to 32 digits).To use this feature, lis-

ten for dial tone and press the REDIAL

button once. Your call will be dialed.

The last number dialed will be stored in

Operating Your Telephone

16

Advertising