Ecler AmicLab - Manual (Page 14)

14
In terms of spectrum this signal is made of two frequency components with the same amplitude:
f and 2*f. 2*f is the displayed value for FREQUENCY parameter to avoid loosing the signal for
frequencies higher than 24kHz (according to sampling theorem).
5.8.4. Level meters
The main panel has level meters to display input and output
levels in real time for each processing channel (when .amiclab is
connected with hardware).
5.8.5. About...
Ecler's logo is an editor's hot zone displaying "About .amiclab "
information window when you click on it.