EcoTech Marine MP60wES - Manual (Page 6)

8
The EcoSmar t
TM
Driver Mounting the Driver
SET Button
MODE Button
Wireless Indicator
LED Strip
OPTION/Power Button
Battery Backup Input Pump Cable Slot
Power Input
Control Dial
9
USING
EcoSmart
TM
WATCH THE VIDEO:
ecote.ch/ecosmartmodes
If the control dial is not green, check the
power cable connections.
3. Mount the driver where it will not get wet using
the included velcro strips (Figure C).
The driver is NOT water proof, and water
damage will NOT be covered under warranty.
Figure A
Figure B
Figure C
1. Plug the power supply into the driver and then
plug the power cord into the outlet (Figure A).
The driver will turn on and be in Constant Speed
Mode by default (green control dial).
2. Observe that the control dial is illuminated
green, indicating that the pump is powered
and operational (Figure B).