Eliminator Lighting DMX DJ - Manual (Page 11)

11 12
3 4
2. Operation Guide
2.2 Programming Scenes
MIDI/Rec
1. Enter Program mode.
2. Press the Scanner button to turn on its fader
control, which is indicated by the lit LED.
You may select several scanners at a time
by tapping of these Scanner buttons, so you
can assign several fixtures at a time with this
unit.
3. Create a desired scene using the faders.
The DMX value is 0 when the fader is fully
down(bottom) and 255 when it is fully up(top).
4. If necessary , you may tap the Page Select
button to control the second set of 8 DMX
channels.
5. Once the scene is satisfactory, tap the MIDI/Rec
button to program this scene into memory.
8
Scanner buttons 1-12