Eliminator Lighting DMX DJ - Manual (Page 28)

2.5 Running Chases
2.5.1 Manual Mode
2.5.2 Auto Mode
4. Use the Bank Up/Down button to scroll through
the chase to run all banks of scenes.
25
2. Operation Guide
You must program scenes before you can run chases.
1. When the power is turned on, this unit enters Manual mode automatically.
2. Select your desired chase by tapping one of the six Chase buttons. A second
tap of this button will deactivate this function.
3. Use the Speed slider(or Tap Sync button) and Fade Time slider to adjust the
current scenes to your desired effects.
BANK
Auto/Del
1. Tap the Auto/Del button to activate Auto mode.
A highlight next to "Auto trigger" will indicate
Auto mode.