Year display adjustment, Day of week display setting, Dimmer control – Emerson Radio CKD9917 User Manual

Page 11

Advertising
background image

10

Year Display Adjustment

To view the correct year, press the

MONTH /

DATE and TIME ZONE buttons together. The

display changes from Time to Year. When you

release the

MONTH / DATE and TIME ZONE

buttons the display returns to the correct Time.

Setting The Year: Hold the MONTH / DATE and TIME ZONE buttons

together. At the same time press the

Day of Week Display Setting

The display will show the Day of Week at the bottom of the LED Display.

The

Day of Week automatically sets after the month / day setting.

Manual Time Adjustment

Daylight Savings and Leap Year Adjustments

Some people like to set their clocks 5 to 10

minutes fast to make sure that they will always be

on time. Even though the SmartSet

®

sets the time

by itself, you still have the option of adjusting the

time manually if you wish.

Setting the time: Press the POWER button to the off mode, hold the CLK

ADJ button and then either the

backward as desired. Each press of the

time by one minute. If you hold the

buttons the display time will

change slowly at first, if you continue holding the

buttons the

display digit will change rapidly.

Note: If you manually adjust the time your new setting is entered into the

SmartSet

®

memory. If the power is interrupted, the display will return to

your new time setting, not the original setting, when the power is restored.

Dimmer Control

If you find the display to be too bright for sleeping, slide the

DIMMER selector

switch to the

LOW position. The display DIMMER selector switch is located on

MON

AM

buttons to set the correct year.

or

buttons to adjust time forward or

or

buttons will change the display

or

or

or

All Daylight Savings and Leap Year adjustments are made automatically by the

SmartSet

®

internal computer as follows:

Start of Daylight Savings Time:

At “2:00 AM” on the 2nd Sunday in March, the clock will automatically advance

to “3:00 AM”.

End of Daylight Savings Time:

At “3:00 AM” on the 1st Sunday in November, the clock will automatically

reset to “2:00 AM”.

Leap Year:

At “12:00 Midnight” on February 28

th

, the calendar display will change to “2 29”.

the left of the side cabinet.

Advertising
This manual is related to the following products: