Programmed playback – Emerson Radio CKD9917 User Manual
Page 16
15
Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows
you to program any disc to play just the tracks you want to hear in the exact
order that you want to hear them. You may program a track or tracks to play
more than once if desired.
NOTE: Programming can only be done while the player is in the Stop
mode. If a disc is playing press the
button to stop playback before
performing the programming steps below.
1) Turn the unit ‘On’, press the
button to select
CD function and load the
desired disc in the player. Wait until the player reads the disc and the
display shows the total number of tracks.
2) Press the
CLK.ADJ/PROG. button. The
PROG. indicator will flash and the Number “1”
will show on the display, indicating that
you can select the first track to be
programmed.
3) Press the
buttons to select the first track. The desired track
number appears on the display.
4) Press the
CLK.ADJ/PROG. button again. The selected track is entered in the
Program memory, as number 01. Then display advances to
“2” indicating
that you can select the next track to be programmed.
5) Repeat Steps 3 and 4 to program up to 20 tracks in the memor
y.
6) After you have programmed all of the desired
tracks press the
button to begin
programmed playback. The
PROG indicator
stops flashing and remains lit. Playback
will begin on the first track you programmed
and continue until all programmed tracks have been played.
As each programmed track starts playing the display will briefly show the track
number being played and then return to the correct time.
NOTES:
• After all programmed tracks have played the player stops but the program
remains in the memory.
Press the CLK.ADJ/PROG. button and then the CD PLAY/PAUSE button to
begin programmed playback again.
• To clear the programmed tracks from the memory, press the STOP
button again or open the CD door. Pressing the ALARM OFF/POWER
button will shut the unit ‘ Off’ , or switching to the Radio function also
clears the program.
MON
CD
PROG
MON
CD
PROG
PROG
PROG
PLAY
MON
CD
PLAY
MON
CD
PLAY
MON
AM
or