Emerson Radio CKD9918 - Manual (Page 16)

15
Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows
you to program any disc to play just the tracks you want to hear in the exact
order that you want to hear them. You may program a track or tracks to play
more than once if desired.
NOTE: Programming can only be done while the player is in the Stop
mode. If a disc is playing press the
button to stop playback before
performing the programming steps below.
1) Turn the unit ‘On’, to select the CD function by press FUNCTION button
repeatedly until the “cd” indicator appear on the display and load the desired
disc in the player. Wait until the player reads the disc and the display shows
the total number of tracks.
2) Press the PROG./MEM button. The PROG.
indicator will appear and the Number “1” will
show on the display, indicating that you can
select the first track to be programmed.
3) Press the buttons to select the first track. The desired track
number appears and the track number will blink on the display.
4) Press the PROG./MEM button again. The selected track is entered in the
Program memory, as first programmed track. Then display advances to “2”
indicating that you can select the next track to be programmed.
5) Repeat Steps 3 and 4 to program up to 20 tracks in the memor y.
6) After you have programmed all of the desired
tracks press the button to begin
programmed playback. The PROG indicator
remains lit. Playback will begin on the first
track you programmed and continue until all
programmed tracks have been played.
As each programmed track starts playing the display will briefly show the track
number being played and then return to the correct time.
NOTES:
• After all programmed tracks have played the player stops but the program
remains in the memory.
Press the PROG./MEM button and then the CD PLAY/PAUSE button to
begin programmed playback again.
• To clear the programmed tracks from the memory, press the STOP
button again or open the CD door,or switching to the Radio function also
clears the program. Pressing the POWER/ALARM OFF button will shut the
unit ‘Off’,
PROG
PROG
PROG PROG
PLAY
PLAY PLAY PLAY PLAY
AM
or