E-MU 1212M PCIe - Manual (Page 119)

6 - Appendix
Technical Specifications
E-MU PCIe Digital Audio Systems 119
ANALOG LINE OUTPUTS (6)
Type
Balanced, low-noise, 2-pole low-pass differential filter,
AC-coupled
D/A Converter CS4398
Level (software selectable)
Professional: +4dBu nominal, 20 dBu maximum
(balanced)
Consumer: -10 dBV nominal, 6 dBV maximum
(unbalanced)
Frequency Response (20 Hz - 20 kHz): +0.0/-0.06 dB
Dynamic Range (1kHz, A-weighted): 120 dB
Signal-To-Noise Ratio (A-weighted): 120 dB
THD + N (1kHz at -1dBFS): -105 dB (.0006%)
Stereo Crosstalk (1kHz at -1dBFS): < -115 dB
Output Impedance 560 ohms
MIC PREAMP/LINE INPUT (2)
Type:
E-MU XTC combo mic preamp & Hi-Z line input w/ soft
limiter
Gain Range: +60 dB
Frequency Response: (min. gain, 20Hz - 20kHz) +0.0/-0.1dB
Stereo Crosstalk: (1kHz, min. gain, -1dBFS), -115 dB
HI-Z LINE INPUT
Input Impedance: 1M ohm
Max Level: +18 dbV (20.2 dBu)
Dynamic Range: (A-weighted, 1kHz, min. gain: 118 dB
SNR: (A-weighted, min. gain): 118 dB
THD+N: (1kHz at-1dBFS): -105 dB (.0006%)
MICROPHONE PREAMP
Input Impedance: 1.5 Kohm
Max Level: +6 dbV (8.2dBu)
EIN: (20Hz-20kHz, 150 ohm, unweighted): -129.5 dBu
Signal-To-Noise Ratio: (A-weighted, min. gain): 119 dB
THD+N: (1kHz at -1dBFS, min gain): -110dB (.0003%)
Frequency Response: (20Hz - 20kHz, gain +40dB): ±0.08 dB
Phantom Power: +48V
Soft Limiter: 5dB max compression (software selectable)
Specifications: 1616
m
PCIe