Envirco NSF Biohazard Cabinet User Manual
Page 3
3
E. Caution: Do not, under any circumstances, cut or remove the grounding prong from the
plug.
5-20 P
Plug
5-20 R
Receptacle
5-30 P
Plug
5-30 R
Receptacle
10448 - EBC 47, 4-Ft Type A/B3
10276, 6-Ft Type A
10451, 6-Ft Type B3
Figure 1: Plug and Receptacle Requirements
F. Unplug the power cord and decontaminate before servicing the cabinet or changing the
filters. Do not use extension cords. If the power cord or plug becomes frayed, cracked,
broken or otherwise damaged, replace it immediately.
G. Only an Authorized ENVIRCO Service Contractor should service the cabinet; however, the
owner can perform certain operations outlined in the manual. Do not attempt to perform any
procedures that are not specifically outlined in this manual.
H. Do not remove the caution labels from the equipment or the associated work area except for
the instruction label on the viewscreen.
I. Do not remove the front panel or HEPA filters from the ENVIRCO Biohazard Cabinet until the
cabinet has been decontaminated.
J. Keep this manual for future reference and for training new operators