Chicago Electric Double Cut Saw 68316 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. SKU 68316
Specifications
Electrical Rating 120V~ / 60Hz / 7.5A
Motor No Load Speed 4200 RPM
Blade Diameter
5″ (125mm) Maximum
Use ONLY blades specifically
designed for this Double Cut Saw
Cutting
Capacities
PVC Pipe up to 1″
Copper Pipe up to 1″
Steel Pipe up to 1″
Corrugated Sheet Standard Thickness
Sheet Steel
up to 14 gauge
Sheet Aluminum up to 1/8″
Oak Wood up to 3/4″
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical
outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Assembly
1. Find the Side Handle mounting
hole on the side of housing.
Mounting
Hole
2. Use Nut and Washer to connect the Side
Handle Support to the housing.
DB5703
3114052
SAFETY
OPERA
TION
MAINTENANCE
SETUP