Carrier Access 5395 Pearl Parkway - Manual (Page 15)

Connecting a Modem to the Access Bank II for Remote Access
1-5
1.5 Connecting a Modem to the Access Bank II
for Remote Access
The RS-232 Management cable (provided) is equipped with a male 26-pin D-type sub-miniature
connector on the end that mates with the secondary RS-232 connector pins of the Management port,
and the female 25-pin connector on the DCE end. To connect the Access Bank II to a modem, use the
DCE end with a Carrier Access Corporation null modem converter.
GND
TXD
RXD
RTS
CTS
DTR
CD
7 GND
14 STXD
16 SRXD
19 SRTS
13 SCTS
10 SDTR
12 SCD
7 GND
2 TX
3 RX
4 RTS
5CTS
20DTR
8CD
BRAID
1 SHIELD 1 SHIELD
RS-232 Management
Data Port on Access Bank II
D-SUB-26 (male)
SECONDARY
DCE-DB-25
(female)
Local PC with Remote
Monitor Software
10 ft.
CARRIER ACCESS CORPOR ATION
ST!"!ÃHhhtr€r‡
Q‚ ‡Г‚Г6ppr††Ã7hxÃDD
8‚€€ГQ‚ ‡Г‚
Hhhtr€r‡ÃQ8
GND
TXD
RXD
RTS
CTS
DTR
CD
7 GND
14 STXD
16 SRXD
19 SRTS
13 SCTS
10 SDTR
12 SCD
7 GND
2 TX
3 RX
4 RTS
5CTS
20DTR
8CD
BRAID
1 SHIELD 1 SHIELD
RS-232 Management
Data Port on Access Bank II
D-SUB-26 (male)
SECONDARY
DCE-DB-25
(female)
Local PC with Remote
Monitor Software
10 ft.
3671
1XOO
0RGHP
0RGHP
97!$ГHГ‡‚Г97!$H
IˆyyÃH‚qr€
ST!"!Ã8hiyr
0RGHP