Carrier Access 5395 Pearl Parkway - Manual (Page 16)

1-6
To connect the Access Bank II to a modem:
1. Connect the PC to a modem using a standard modem cable.
2. Connect a modem to the Access Bank II using the CAC Remote Management Cable and a
Null modem adapter.
3. On the Access Bank II control panel, set System Configuration Local/Remote DIP switch 1
to Remote mode.
Caution: Null modem adapter or cable must adhere to the wiring diagram
shown above for the Remote Monitor software to operate correctly in this
mode.
1.5.1 Starting Up Remote Monitor
Once installation is complete and the PC is cabled to either a modem or the Access Bank II, launch
the Remote Monitor application.
To launch the application:
1. Double click the CAC Remote Monitor icon or launch the Remote Monitor application from
the Windows Explorer. The first screen displayed is the Remote Management screen with a
warning window.