Carrier Access 5395 Pearl Parkway - Manual (Page 23)

General Rules and Tips for Using the Remote Monitor
1-13
1.8 General Rules and Tips for Using the Remote Monitor
The Remote Monitor is designed for easy setup, configuration, monitoring, and management of the
Access Bank II. Following certain rules and tips will ensure more reliable results. The following
sections describe these rules and tips.
• Be sure you have the correct product selected before you begin making screen changes,
or you will have to begin the changes again. The Remote Monitor, when started, defaults
to the Access Bank II product.
1.8.1 Reading and Sending Screens
• Reading screens means loading information displayed on the current configurable
screens, and some non-configurable information, from the Access Bank II into the
Remote Monitor. Sending screens means downloading the information displayed on the
current or flagged configurable screens from Remote Monitor into the Access Bank II.
• When reading screens from the Access Bank II or sending screens to the Access Bank II,
canceling the transfer can result in a partial transfer and a corrupted configuration. If this
occurs, redo the correct read or send operation to clear up the problem.
• When changing screens, it is often best to change all the screens you want to change
before sending screens to the Access Bank II. Some screens are interactive with others
(specifically the Static Connection, Channel/Signal Type, and V.35 Data screens in the
Connections group), and must be read or sent together.
Send all screens to unit. Click on this icon to
send all data from Remote Monitor to your
Access Bank II unit.
Read all screens from unit. Click on this icon to
read all data on your Access Bank II and display
it in Remote Monitor.
Send all flagged screens to unit. Click on this
icon to send all of the screens you’ve flagged in
Remote Monitor to your Access Bank II.
Clear all flags. Click on this icon to clear all flags
in Remote Monitor without sending the flagged
screens.
Send current screen to unit. Click on this icon to
send the data on the current Remote Monitor
screen to your Access Bank II.
Read current screen from unit. Click on this icon
to read the data for the current Remote Monitor
screen from your Access Bank II.