Offset, Smux proof, Interface category – Expert Sleepers Silent Way v2.4.3 User Manual
Page 50
The “Thru” input chooses a stereo pair of inputs which will receive a signal from another
Silent Way plug-in which is outputting a signal for the ES-4/5 e.g. from the ES-4 Control-
ler, from Silent Way Sync (in ES-4 mode) or from the Voice Controller (in ES-4 mode). Use
this input to stack plug-ins on a single track to address multiple ES-4/5/expanders at the
same time.
The drop-downs labelled “1” to “4” choose a plug-in input that will be routed to the corre-
sponding output of the ESX-4CV.
Offset
The “Offsets” controls let you dial in a voltage
offset on each ESX-4CV output. The values on
the controls are in Volts.
SMUX Proof
The ‘SMUX Proof’ button modifies the output of the plug-in to be
compatible with the
plug-in. It should be acti-
vated whenever the SW ESX-4CV Combiner’s output is being
passed through the SW SMUX plug-in, typically when running at double sample rates
(88.2/96kHz) with an Expert Sleepers ES-3 module.
Interface Category
The Interface Category drop-down menu allows you to inform the plug-
in of what kind of audio interface will be outputting the plug-in’s sig-
nal. Please refer to
for more details - the specifics are likely to be more fluid than should be put here in the
user manual.