Expert Sleepers Silent Way v2.4.3 - Manual (Page 92)

Silent Way Trigger
Introduction
Silent Way Trigger is a simple plug-in for generating a gate or envelope in response to an
incoming MIDI note or CV trigger. A typical application would be for triggering drum
sounds, where you might have a number of different sounds mapped to different notes.
The plug-in has a single output. If you want more than one output per note (e.g. a gate
and and envelope) simply use multiple copies of the plug-in set to respond to the same
note.
In many respects the Trigger plug-in is a cut-down version of the Voice Controller , and
many of the same ideas apply.
Setup
The ‘Mode’ menu selects on of the possible output
signals for the plug-in. The options are Gate, Trigger,
Envelope and Velocity, which all correspond to the
similarly-named signals in the Voice Controller, below.
The ‘Note’ control sets which MIDI note will trigger
the plug-in.
The ‘Smooth’ control has the same effect as that in the
DC plug-in (see
above ).