Carrier DATACOLD 500 T/R - Manual (Page 26)

Enclosure B Replace paper roll
If a coloured line appears on the last meter of paper, the paper roll needs to be replaced as follow :
1- Push lock lightly upwards and pull
the printer module carefully forward.
2- Open the upper part of the front panel.
3- Insert a new paper roll on the spindle. 4- Place the printer module carefully back into the
recorder until it is locked again.
Attention: For the T-version first check if the
connector is fitted properly in the original position.
Page 26 62-61138-20 (02/03)