Features, Transmitter fp-t3eg, Servo fp-s24 – Futaba 3EG AM User Manual

Page 3: 1receiver fp-r3f

Advertising
background image

•FEATURES

The FP-3EG is a high quality 3 channel, expanded digital proportional radio control set.

The receiver and servo power is a four-battery; 4.8V (Ni-Cad)/6.0V (Dry-Cell). The
transmitter power supply is 9.6V (Ni-Cad)/10.5V (Dry-Cell). 3FG with S24 servos
only comes with Ni-cads for both TX and RX. Speed and torque of our servo are the

highest in its class.

Transmitter FP-T3EG

•Rudder dual rate (dual-rate on, dual-rate

off). The desired rudder angle can be se-

lected when dual-rate on.

•Servo reversing switch at rudder andn

d

throttle channel.

•Throttle and rudder mixing is adjustable

up to the limit point.

•Three channel transmitter. Third channel

has a click knob and can be conveniently

used as a subchannel.

•Throttle lever has a neutral shift device,

but can be instantly changed to a ratchet
type.

• Semi-open gimbal sticks provide maximum

feel.

• Neck band provided as standard. Com-

fortable operation is possible by hooking
the band around your neck.

•Seven pen-cell battery power supply can

also be changed to Ni-Cad battery (NT-8C).

• Beautiful exterior based on human engine-

ering. Easy-to-use design.

Servo FP-S24

•Highest output torque (4.5kg-cm/62.7oz-in.

or greater) of any servo in its class.

•Output gear is supported at the top and

bottom by ball bearings for excellent
neutral characteristics, long life, and
smooth operation.

• Large 20m/m diameter coreless motor fea-

tures high torque near neutral and exact
tracking of even minute rudder movements.

• Indirect drive system extends the life of

the potentiometer substantially.

• Watertight/dustproof.

Besides the FP-S24, FP-S27, watertight

servo is available with this system.

1

Receiver FP-R3F

•Miniature type, light, weight, rugged con-

struction.

•Crystal is replaceable from the outside.

•3P mini-connectors are compatible with

existing sets.

•3 channel specifications.
•Newly developed receiver use Futaba Cus-

tom I/C, BA633. This I/C is extremely
stable against power supply voltage fluctu-
ations.

•Adjacent frequency interference is mini-

mized by the use of an RF amplifier circuit
and ceramic filter.

Advertising