Caution, Using the frequency board, Servo horn – Futaba 4YF User Manual
Page 15: Non-slip adjustable lever head
14
USING OTHER FUNCTIONS
U
SING
O
THER
F
UNCTIONS
Using the Frequency Board
Pass the frequency board over
the small part of the antenna
and slide it to the large part.
1
Stick the band number seal
to the frequency board.
2
Install the frequency board
to the antenna.
*Use side A or side B, depending on the
thickness of the antenna. Cut off the unused
side along the slot with cutters, etc.
Servo Horn
Spare servo horns are supplied with the digital proportional R/C set. Use them ac-
cording to the application.
Use the horn set screw sup-
plied with the servo.
If a long screw is used, the interior of the
servo may be damaged.
Non-slip Adjustable Lever Head
The length of the stick lever head can be adjusted.
1
Unlock lever heads A and B
by turning them in the arrow di-
rections.
2
Set the stick to the most
comfortable length and lock the
lever heads by turning them in
the opposite direction of the ar-
rows.
CAUTION