Futaba 4YF - Manual (Page 16)

15
USING OTHER FUNCTIONS
Trainer Function
The trainer function is a very effective way for training students. To use it, the special
trainer cord (sold separately) is necessary.
The special trainer cord can be connected to SKYSPORT4, FF5, SKYSPORT6, 6X
series, 7U series, 8U series, 9C series, and PCM1024Z series transmitters.
Operating Instructions
Instructor side:
Turn on the power switch and extend the antenna to its full length.
When the trainer switch is not pressed, the instructor has control.
When the trainer switch is pressed, control is transferred to the student.
Student side:
Never turn on the power switch.
*Connect the student and instructor transmitters with the trainer cord.
WARNING
Never turn on the student transmitter power switch.
Turning on the power switch will cause interference and a crash.
Set the student and instructor transmitters to the same settings.
For example, if the direction of operation is reversed, control will be lost and the plane will
crash.
The opposite side can only use an FM (PPM) type transmitter.
If the modulation method is different, control is impossible.