Futaba GY520 - Manual (Page 13)

13
GY520 I
NSTALLATION
The gyro should be mounted on a rigid platform, at least
6in [152mm] away from a Nitro Engine. It is not necessary
to mount the gyro near the main shaft of the helicopter but
it is very important that the mounting area chosen is rigid.
Please refer to your helicopter manufacturer’s instructions for
recommended mounting locations.
Installing the gyro
The GY520 is supplied with two 2mm Mounting Pads, two
3mm Mounting Pads, and one 1mm Damping and Shield
Plate to help accommodate several installation methods. Most
electric helicopters with minimal vibrations can use one 2mm
mounting pad to mount the gyro onto the Gyro Mount. If the
GY520 is mounted near the ESC, near a servo, or near the tail
rotor belt we highly recommend using two 2mm Mounting
Pads and the steel Damping/Shield Plate to help prevent
electromagnetic interference from reaching the gyro.
2mm Mounting Pad
Gyro Mount
Recommended Installation for Smaller Electric Helicopters
(250, 450, and 500 size helis)
Y520 Mnl.indd 13 Y520 Mnl.indd 13 4/7/2009 7:55:03 AM 4/7/2009 7:55:03 AM