Front panel features (continued) – Crest Audio XRM - 12 User Manual

Page 33

Advertising
background image

Front panel features (continued)

Master Fader - Mix Output Level

Each of the twelve mixes has its own 60mm master fader.This fader controls the main
output of the mix and allows the operator to easily adjust the level sent to the perform-
ers. Up to 10dB additional gain is available.The faders are arranged in odd/even pairs for
ease of use when operating in Stereo mode. Nominal setting is at the 0 (unity) point.

Peak/Signal LED + AFL Switch & indicator

PK/SIG This bi-color LED indicates the pre-fader mix level with varying intensity Green

illumination. If critical internal signals get to within 3dB of clipping, the LED will turn Red.This
LED will also indicate AFL activation by turning Red.

AFL This switch allows the engineer to monitor the post-fader level of the mix.

Pressing the switch will turn the PK/SIG LED Red and feed the mix to the Solo system where
it can be viewed (Solo meters) and monitored (HP and Monitor Out) by the operator. In
Mono mode, only the associated mix is fed to the Solo system. It appears as a mono signal in
the Solo system (equal level in both left & right). If the associated STR PAIR switch is
depressed (located above the odd-numbered faders), then pressing EITHER the odd or even
AFL switch will cause BOTH LEDs to illuminate and both mixes will be fed to the Solo system
as a stereo pair, odd mix to left, even mix to right.

Repeat as necessary:

The previous descriptions of the functions associated with each of the Master faders are
repeated for the remaining Master faders.The stereo pairing, when activated by a STR
PAIR switch, always operates between the associated mixes 1-2, 3-4, 5-6, 7-8, 9-10 and 11-
12. Not only are the output faders and their controls affected by this switch, the associat-
ed mix sends on all the input channels are also affected.The Sends are reconfigured from
their normal Lev/Lev operation (odd-pots feed odd buses, even-pots feed even buses) to
the Lev/Pan stereo configuration (odd-pots feed BOTH odd and even buses, even-pots
pan between the buses).

L E D

Master section

3

p. 33

5

10

0

5

10

20

30

15

Advertising