Crest Audio XRM - 12 - Manual (Page 41)

p. 41
Specifications
4
Specifications
Frequency response +0/-0.5dB 20Hz-20kHz ref 1kHz
(any input to any output)
THD+noise any output <0.01% THD 20Hz-20kHz@ +15dBu out
Noise mic ein: better than –128dBu 20Hz to 20kHz 150 ohm source, 60dB gain
Bus Noise: better than -85dBu
Crosstalk/Shutoff All Crosstalk measurements: 20Hz to 20kHz BW
Channel Mute >90dB
Channel Fader attenuation >90dB
Mix Send attenuation >85dB
Phase Shift < +/- 30 degrees, 20Hz to 20kHz – mic-in to mix out
XLR In F- XLR 4k ohm balanced
max voltage gain to mix outs = 92dB
Split Out M- XLR 4k ohm balanced
Passive “Y-Split” of XLR In
Line-in TRS >10k Ohms balanced
XLR/TRS Com Input >10k Ohms balanced
Bus inputs >10k Ohms balanced
Mix outputs XLR 100 ohms balanced
Mntr outputs XLR & TRS 100 ohms balanced
Headphones Stereo, Intended to drive > eight-ohms
Dimensions 17.5" in height (10u) x 19" in width x 4.5" in depth behind panel
Weight 30 pounds
Internal Power Supply 100 -240 VAC, 50/60 Hz
Warranty Five Years